1. Double-click on vxp2k_THDE_v2.3.40.t6.52.exe. A window opens.双击下载的固件v2.3.40软件。

pcidv.com/triplehead2go固件升级步骤1


Note: The serial number, firmware version, and EEPROM table might be different on your Matrox unit.

序列号可能因为你的机器不同而不同

3) Click on "Update your Matrox hardware" and select the file THDE_v2.3.40.t6.52.pkg. Click "Open".

在出来的窗口选择THDE_v2.3.40.t6.52.pkg打开。


pcidv.com/triplehead2go固件升级步骤2


A confirmation window is displayed providing the estimated time for completion.确认OK。


pcidv.com/triplehead2go固件升级步骤3


4) Click OK to continue. Wait for the progress bar to finish. You are asked to restart your system.重启电脑


pcidv.com/triplehead2go固件升级步骤4

pcidv.com/triplehead2go固件升级步骤5


5) After rebooting your system, install the GXM software suite 2.03.02 or later and reboot your system again. 重启后安装GXM software suite 2.03.02或更新版本的软件包

6) After rebooting your system, right-click on the PowerDesk icon and click "Matrox GXM Setup"再重启后,屏幕右下角右键点击Powerdesk图标,选择GXM setup


pcidv.com/triplehead2go固件升级步骤6


The main PowerDesk window appears.出现GXM设置窗口



7) Click on the "Change..." button under "Current display mode", where the following triple widescreen resolutions are displayed. 点击change,在"Current display mode"选项下出现宽屏分辨率选项。

pcidv.com/triplehead2go固件升级步骤8


8) Select the resolution that is supported by your monitors and click "Apply".应用OK。